Grass Valley K2 Dyno Installation v.2.0 - Manual (Page 14)

Comment Task
Next: Refer to K2 Dyno Controller User Manual and K2 Dyno Replay System Quick Start
Guide for operation instructions.
K2 Summit/Solo system requirements
To support connection to a K2 Dyno Replay Controller, your K2 Summit Production Client or K2
Solo Media Server must meet requirements as follows. Refer to compatibility information in release
notes for complete and updated requirements.
• K2 Summit Production Client with internal storage, direct-connect storage, or shared K2 SAN
storage.
• All K2 Summit systems controlled by a K2 Dyno Replay Controller on a K2 SAN must have
their timecode synchronized to house timecode
• Depending on media formats required, a K2 Summit Production Client must have appropriate
licenses and/or hardware installed.
• The version of K2 system software must be compatible with the version of K2 Dyno software.
Refer to release notes.
• AppCenter Pro license is required. On K2 Solo Media Server, the license is standard. On K2
Summit Production Client, the license must be installed, if not already present.
• If using ChannelFlex Suite features, the K2 Summit Production Client or K2 Solo Media Server
requirements are as follows:
• K2 system software 7.4 or higher
• AppCenter Elite license
• Super Slo-Mo also requires the HD license
Procure software and/or hardware
Depending on your desired system, procure the following items so that they are available for the
installation process. You can download software from
http://www.grassvalley.com/support/downloads.
• If K2 System software and K2 Dyno Client software must be installed or upgraded, procure the
appropriate version via download or other mechanism.
• If AppCenter Pro is not currently licensed on the K2 Summit Production Client to which you
are connecting the K2 Dyno Replay Controller, consider the following:
• When you install K2 system software, AppCenter Pro is licensed with a 30 day trial license.
• To avoid installation delays, start the licensing process well before the 30 day trial period
expires.
14 K2 Dyno Controller Installation Manual 14June 2011
Overview of systems