Grass Valley iTX Output Server 2 v.2.6 - Manual (Page 67)

61
iTX Output Server 2
Channel Configuration Guide
4 Make sure Enabled is checked. This will run the instance of the service when Server
Controller is started.
5 In the Arguments field, the following arguments are available:
Argument Description
-config SingleChannel Single input, single output channel (for all I/O cards).
-config DualChannel Two independent channels, each with a single input (for
Corvid 44 and Corvid 88 SDI I/O cards only).
-config Simulcast Two channels sharing two inputs (for Corvid 44 and Corvid
88 SDI I/O cards only).
6 Make sure Auto Restart is checked. This ensure Server Controller automatically
restarts the I/O Device Controller service in the event of a failure.
Server Controller Configuration for Output Server 2
To edit the Server Controller configuration for an Output Server 2 channel:
1 From Windows, click Start > All Programs > iTX2.0 > Server Controller Config.
The Server Controller Configuration dialog appears.
2 Go to the Services tab.
3 Select the Output Server 2 service then click Edit.
The Service Details dialog appears.