Grass Valley iTX Output Server 2 v.2.6 - Manual (Page 37)

31
iTX Output Server 2
Channel Configuration Guide
a To set the horizontal output timing value in pixels, enter a value or use the slider on
the Horizontal (Pixels) field.
b To set the vertical output timing value in lines, enter a value or use the slider on the
Vertical (Lines) field.
8 Click Save to store your changes and automatically reboot the I/O Device Controller
service.
Accessing the Output Server 2 User Interface
The configuration of the Output Server 2 service is performed from the Output Server 2
user interface, which is external to the iTX Desktop client. The user interface consists of two
panels, the Configuration panel and the Engineering panel.
To access the Configuration and Engineering panels for the Output Server 2 service:
1 On the playout server running the service, maximize the Server Controller application.
If Server Controller is not running, start it by going to Start>All Programs>iTX
2.0 > Server Controller .
2 Select the Controlled Services tab.
All of the services running on that server are listed in a grid, along with their status, URI
path, executable path, failure information and command line arguments.
If you have more than one channel configured on your playout server, there will be an
instance of the Output Server 2 service for each one. Each instance can be identified by
the
-n (channel name) argument in the Startup Parameters column.
3 Double-click on required instance of the Output Server 2 service.
The user interface for Output Server 2 appears showing three tabs, System Status,
Configuration and Engineering.
The image below shows the Configuration tab.