Grass Valley iTX Output Server 2 v.2.6 - Manual (Page 43)

37
iTX Output Server 2
Channel Configuration Guide
3 Select a Dolby output group from the Audio Output field.
Note: Clicking Reset will revert the values to the default profile, as defined
by the type of Dolby output chosen in iTX Desktop (e.g. DolbyD 2.0, DolbyE
5.1)
4 Review and/or set the metadata parameters that are listed in the Metadata column.
Hovering over the metadata setting field displays a brief description of the metadata
parameter.
5 For each metadata parameter, set the associated Rule field to either:
• Manual Value
• Decoders, then Manual value.
6 Click Save to apply and store the metadata parameter settings.
Alternatively, wait until you have finished making changes in other areas of the
Configuration panel, then click Save.
Configuring Audio Upmixing
The Upmixing tab is only required for channels where the audio input needs to be upmixed
to a 5.1 group before being output. For example a stereo input being upmixed to Dolby 5.1.
To enable and configure audio upmixing:
1 Open the Output Server 2 user interface for the channel you want to configure, as
described in Accessing the Output Server 2 User Interface , on page 31.
2 Go to Configuration > Upmixing tab.
The upmixing configuration options appear.
3 Select a Dolby output group from the Audio Output field.