Grass Valley iTX Output Server 2 v.2.6 - Manual (Page 54)

48
Output Server 2 Channel Configuration
Routing Live Events to Destinations for Simulcast Setups
11 Click Save.
12 Repeat step 4 to step 11 for each channel to be configured.
Routing Live Events to Destinations for Simulcast Setups
For live events, you must specify the router matrix and destination of the playout server in
the Live Event Configuration panel of the Live plugin configuration.
In a simulcast setup, each channel must be routed to the same destination.
To specify the router destination for live events in a simulcast setup:
1 Start the iTX Desktop on a client PC and login with an Administrator profile.
2 Open the Engineering layout.
3 Click Channel Config.
The Channel Config pop-up layout appears.
4 From the View list, select the view with the channels to be configured.
5 Select a channel to configure.
6 Click the Plugins tab.
7 Click the Live plugin tab.
The Live Event Configuration panel appears.
8 For Matrix, select the router matrix with the required destination and output.
9 For Destination select the destination required the channel being configured:
• The main and simulcast pair should be routed to the same destination.
• The backup and simulcast backup pair should be routed to the same destination.
10 For Default Duration box, set a default duration for live events with no duration in the
live event asset or schedule.
The hierarchy for live event durations is a duration specified in the schedule has the
highest priority then asset durations then default durations.
11 Click Save.
12 Repeat step 4 to step 10 for each channel to be configured.