Grass Valley 8900 Frames Gecko 2009 - Manual (Page 48)

48 Gecko Frames — Instruction Manual
Section 3 — Power Up
Applying Power
Upon applying power to the frame, verify that the green power LED for
each power supply (assuming a redundant supply is present)PS1 and PS2
is illuminated (
Figure 19 ). If the frame is a TF or TFN model (with fans),
check the red FAULT LED. It should be off if the fans are operating cor-
rectly.
Figure 19. Power Indicator LEDs (TF frame shown)
Other indicator LEDs can be viewed on the controller module (Frame
Monitor or 8900NET module) with the front cover removed. Frame
Monitor module indicators are discussed in
Section 4-Monitoring and Con-
trol . If you have a 8900NET module installed in the frame, see the 8900NET
Network Interface Module Instruction Manual for indicator details.
LOCK
0636-15
Power Indicator LEDs
Fault LED
PS 1 PS 2 FAULT