Grass Valley EDIUS Pro v.7.4 - Manual (Page 31)

25
Detailed Settings
EDIUS - Hardware Setting Guide
[VCR Constants] [VCR ID(V)]
VCR Constant 1 byte1 and byte2 are displayed.
For SONY decks, the deck ID (including model/mode) is displayed.
[Check for Deck ID]
Click it to load VCR ID (deck ID) from the connected deck.
[VCR]
Display the deck name corresponding to the VCR ID (only ID and deck
names which are set as preset). If there are multiple decks with the same ID,
all the decks are displayed.
[Edit Delay]
VCR Constant 1 Byte 6 is displayed.
If the deck is not in the preset, enter manually.
[E-E Delay]
VCR Constant 1 Byte 5 is displayed.
If the deck is not in the preset, enter manually.
[Start Delay]
VCR Constant 2 Byte 2 (Data 10 depending on the VCR) is displayed.
If the deck is not in the preset, enter manually.
[Load Default Presets]
Initialize the edit delay, E-E delay, and start delay with the preset values.
[Edit Settings] [Preroll Time]
Set the preliminary operation time (preroll).
[Postroll Time]
Set the post operation time (postroll).
[FirstEdit Pre-Rec Time]
Set the draft (margin) length at FirstEdit (storing the control signals as the
standard point for editing at the top of the tape automatically).
[Default] Restore the default settings.