Grass Valley EDIUS Pro v.7.4 - Manual (Page 20)

Configuring Editing Environments
14 EDIUS - Hardware Setting Guide
[Video Output Settings] (STORM 3G ELITE/STORM 3G)
0
The settings of a monitor output device used for capturing.
[Analog Output Settings] [Setup Level]
Set the setup level (black level) of NTSC from [0IRE] and [7.5IRE].
0IRE is used in Japan, and 7.5IRE is used in North America.
[Component Level]
Select the component level from [SMPTE] and [BETACAM].
[Component Gain]
Adjust the output gain of the SD component.
[SDI Output Setting]:[1080 59.94p/
50p] Settings used when 1080 59.94p or 1080 50p signals are output from the SDI
OUT terminal of STORM 3G ELITE.
[1x 3G-SDI]
Output signals from the SDI OUT (A) terminal and the SDI OUT (B) terminal
as 3G-SDI.
[2x HD-SDI]
Output signals as HD-SDI
×2 using the SDI OUT (A) terminal and the SDI
OUT (B) terminal.
[SDI Output Setting]:[OUT-B] Output settings for the SDI OUT (B) terminal of STORM 3G ELITE.
[Multi Format]
HD/SD is switched automatically according to the input format.
[1080i when 1080p]
When the output format is 1080p, the video is output in 1080i format.
[SD Only]
Output downconverted video.
[VITC Output] [Line 1]/[Line 2]
Set the number of VITC output lines in the input field of adopted video stan-
dard (NTSC/PAL).