Grass Valley EDIUS Pro v.7.4 - Manual (Page 30)

Configuring Editing Environments
24 EDIUS - Hardware Setting Guide
[Video Output Settings] (STORM 3G ELITE/STORM 3G)
0
The settings of an output device used for printing to tape.
[Video Output Settings] (STORM 3G ELITE/STORM 3G) 0 P14
[Audio Output Settings] (STORM 3G ELITE/STORM 3G)
0
The settings of an output device used for printing to tape.
[Audio Output Settings] (STORM 3G ELITE/STORM 3G) 0 P27
[Downconvert Settings] (STORM 3G ELITE)
0
The settings of an output device used for printing to tape.
[Downconvert Settings] (STORM 3G ELITE) 0 P16
[Output Control Settings] (STORM 3G ELITE/STORM 3G)
0
The settings of an output device used for printing to tape.
[Control Port] Not available.
[Control Channel] Select whether to use RS-422 remote control.
For STORM 3G ELITE, when [RS422 REMOTE A] or [RS422 REMOTE B] is
selected, the [Remote A] or [Remote B] indicator on the front panel of
STORM 3G ELITE lights.
[Check Deck Control]
Check if the deck connected to REMOTE terminal can be controlled by
EDIUS when using RS-422 remote control.