Grass Valley EDIUS Pro v.7.4 User Manual
Page 14
Configuring Editing Environments
8
EDIUS - Hardware Setting Guide
26 Confirm the details, and click [Completed].
The icon of the created preset appears in the device preset list.
27 Click [OK].
For details on the procedure of capturing and exporting with a device preset, refer to EDIUS Reference Manual.
Capturing Stereoscopic Sources using STORM 3G ELITE/STORM 3G
To capture sources in the stereoscopic video format using STORM 3G ELITE/STORM 3G, select a capture method
from the following.
The capture operation with the settings of [Dual Stream], [L Only], [R Only], [Side by Side], [Top and Bottom], [Line
Interleave], and [L/R 2 file output] is the same as the normal capture operation.
The capture operation with the settings of [L/R 2 file output - Capture by turns] is the same as the normal batch capture
operation.
For details on capture operation and batch capture operation, refer to EDIUS Reference Manual.
3
•
If only the audio part in a stereoscopic source is captured, the WAV file is created.
[Dual Stream]
Record the L side and the R side of the input video to a single file with 2
streams maintained.
[L Only]
Capture only L side of the input video.
[R Only]
Capture only R side of the input video.
[Side by Side]
Combine the L side and the R side of the input video so that the left half of
the frame is L and the right half is R, and record it as a single file.
The recorded file is stored to the bin as a stereoscopic clip.
[Top and Bottom]
Combine the L side and the R side of the input video so that the upper half of
the frame is L and the lower half is R, and record it as a single file.
The recorded file is stored to the bin as a stereoscopic clip.
[Line Interleave]
Combine the L side and the R side of the input video so that L is placed on
the upper side of the scanning line and R is placed on the lower side, and
record it as a single file.
The recorded file is stored to the bin as a stereoscopic clip.
[L/R 2 file output]
Record the L side and the R side of the input video by 2 streams into 2 files
simultaneously.
The recorded L and R side files are stored to the bin as stereoscopic clips.
[L/R 2 file output - Capture by
turns]
Use the batch capture function to capture the L side and the R side of the
input video separately.
The recorded L and R side files are stored to the bin as stereoscopic clips.
(The [L/R 2 file output - Capture by turns] setting is enabled while batch cap-
turing. When capturing in a normal way, only the L side is captured.)