Grass Valley EDIUS Pro v.7.4 - Manual (Page 19)

13
Detailed Settings
EDIUS - Hardware Setting Guide
[System Settings] ( STORM MOBILE/HDSTORM)
0
The settings of a monitor output device used for capturing.
[REF Signal Output] Select a format to output the REF signals from [BB NTSC], [BB PAL],
[Tri-Level 1080/59.94i], [Tri-Level 1080/50i], [Tri-Level 1080/23.98PsF],and
[Tri-Level 1080/24PsF].
For STORM 3G ELITE, when [BB NTSC] or [BB PAL] is selected, the [Ref
Out SD] indicator on the front panel of STORM 3G ELITE lights, and when
[Tri-Level 1080/50i], [Tri-Level 1080/23.98PsF], or [Tri-Level 1080/24PsF] is
selected, the [Ref Out HD] indicator on the front panel of STORM 3G ELITE
lights.
[Default] Restore the default settings.
[Audio Monitor] Select the audio channel to monitor.
[HDMI Audio Output Setting] Specify the output from the HDMI connector. Select if 8 audio channels are to
be output or the 2 channels specified as analog audio channels are to be out-
put.
[Analog Output Settings] [Setup Level]
Set the setup level (black level) of NTSC from [0IRE] and [7.5IRE].
0IRE is used in Japan, and 7.5IRE is used in North America.
[Component Level]
Select the component level from [SMPTE] and [BETACAM].
[Component Output Setting] [Multi Format]
HD/SD is switched automatically according to the input format.
[SD Only - YPbPr]
Output downconverted video (component YPbPr).
[SD Only - Y/C]
Output downconverted video (S-Video).
[HDMI Input] [Disable FIR filter at RGB/YUV444 to YUV422 conversion.]
Check this option to disable the FIR filter when converting to YUV422 which
is the color space used for digital TV.
[Default] Restore the default settings.