Grass Valley EDIUS Pro v.7.4 - Manual (Page 25)

19
Detailed Settings
EDIUS - Hardware Setting Guide
[Video Input Settings] (STORM 3G ELITE/STORM 3G)
0
The settings of an input signal adjustment used for capturing.
The settings are available only for the Component, S-Video, or Composite input.
[Brightness] Adjust the brightness of video. Set the value smaller to make the video
darker, and set the value larger to make the video brighter.
[Contrast] Adjust the contrast of images. Set the value smaller to make the contrast
lower, and set the value larger to make the contrast higher.
[Hue] Adjust the hue of video. When yellow is set as a standard, set the value
smaller to make red stronger, and set the value larger to make green stron-
ger.
• This option is not available for component input.
[Saturation] Adjust the lightness of color. Set the value smaller to make the color lighter,
and set the value larger to make the color deeper.
Set the value to 0 (minimum value) to make images grayscale.
[Setup Level] Set the setup level (black level) of NTSC.
[Component] Select the component level of NTSC.
[Gain Control] Configure the video luminance. Select [Manual] to configure the luminance
manually. Select [Automatic] to set the optimal luminance automatically.
[Sustain Ancillary Data] Check this option to append ancillary data such as closed captions when
capturing.
[Default] Restore the default settings.