Grass Valley EDIUS Pro v.7.4 User Manual
Page 27
21
Detailed Settings
EDIUS - Hardware Setting Guide
[3D/2D Visual Processing] tab
[White/Black Gain] tab
[3D]
Configure the effects of the 3D noise reduction and the 3D visual processing
(only for the composite input).
[2D]
Remove the noise by nonlinear noise reduction filter. You can configure this
option separately from the 3D processing.
[Luminance NR]
Configure the effect of the noise reduction in luminance (Y).
[Chroma NR]
Configure the effect of the noise reduction in chroma (C).
[Default]
Restore the default settings.
[Black Gain]
Strengthen the gain in the low luminance areas of the luminance signal. Set a
higher value to emphasize black. If you select [None], [Adaptation Level] and
[Threshold] become disabled.
[Adaptation Level]
Configure the adjustment level of the black expansion. Set the higher level to
emphasize black.
[Threshold]
Configure the luminance level (brightness) to emphasize black. Move the
cursor to the right to set a higher level.
[White Gain]
Weaken the gain in the high luminance areas of the luminance signal.
Improve the tone reproduction of a part which is whitened out due to the high
luminance. If you select [None], [Adaptation Level] and [Threshold] become
disabled.
[Adaptation Level]
Configure the adjustment level of the limit for the white gain. Set a higher
level to make adjustment level lower.