Grass Valley AMX-3981 2014 - Manual (Page 18)

GUIDE TO INSTALLATION AND OPERATION
12 | AMX-3981
5 Remote control using iControl
The operation of the AMX-3981 may be controlled using Miranda’s iControl system.
• This manual describes the control panels associated with the AMX-3981 and their use.
• Please consult the iControl User’s Guide for information about setting up and operating iControl.
In iControl Navigator or iControl Websites, double-click on the AMX-3981 icon to open the control panel.
5.1 The iControl graphic interface window
The basic window structure for the AMX-3981 is shown in figure 5.1. The window identification line gives the card type
(AMX-3981) and the slot number where the card is installed in its Densité frame.
There are four main sections in the window itself, identified in figure 5.1:
Section 1. The top section displays six icons on the left. These icons report different statuses such as card
communication status, input signal and reference signal format and statuses. In some instances, they relate to
conditions defined through parameters settings.
Icon # 1 2 3 4 5 6
Move the mouse over an icon and a status message appears below the icon providing additional information.
1
2
3
4
Figure 5.1 AMX-3981 iControl graphic interface window