Grass Valley ADVC-700 - Manual (Page 45)

Chapter 2 - Basic Operations
45
702 local disable
Local switch disable
LCD display
702 local disable
off Permits operation by the MODE switch.
(Factory default)
702 local disable
on
Prohibits operation by the MODE switch.
702 local disable
auto Prohibits operation by the MODE switch, only when the deck control
by 9-pin remote connector is enabled.
702 local disable
off(PB mode) Permits operation by the MODE switch, with the switching by AV/C
command prohibited.
Enables/Disables the MODE switch.
703 cycle master
Cycle master enable/disable
LCD display
703 cycle master
off
Does not acquire cycle master.
703 cycle master
on Acquires cycle master.
(Factory default)
* If this menu is set to Off, external sync of the “perfect sync mode” does not work.
Enables/Disables cycle master acquisition.
If you connect ADVC700/ADVC1000 units each
other using IEEE1394 cable, set this option to
OFF.