Grass Valley ADVC-700 - Manual (Page 38)

Chapter 2 - Basic Operations
38
106 Sout aspect info
S-Video output aspect ratio setting
LCD display
106 Sout aspect info
4:3 Sets the S-Video in 4:3 aspect ratio.
(Factory default)
106 Sout aspect info
16:9(letter box)
Sets the S-Video in 16:9 aspect ratio (letter box).
106 Sout aspect info
16:9
Sets the S-Video in 16:9 aspect ratio.
Specifies the aspect ratio for the S-Video that
ADVC700 outputs.
107 video standard
Video standard settings
LCD display
107 video standard
>>>
sub-menu
video standard
NTSC(525)/0IRE Specifies the video standard.
NTSC(525)/
0IRE
Sets to NTSC with the setup level of 0 IRE.
NTSC(525)/
7.5IRE
Sets to NTSC with the setup level of 7.5 IRE.
PAL(625) Sets to PAL.
SECAM(625) Sets to SECAM.
set by DIP
switch
Adopts the setting by the DIP switch on the rear
panel. (Factory default)
Specifies the video standard. Once you have
changed the video standard settings (or the setup
level), you are prompted to turn the power off to
make the new setting take effect.
Press the Select dial to display the sub-menu.
In the sub-menu, turn the Select dial to choose the sub-menu item.