Grass Valley ADVC-700 - Manual (Page 22)

Chapter 2 - Basic Operations
22
Error status screen
This screen shows error messages.
• Error is not detected
No Error
• When error has occurred (When status LED is lit red)
not detected:
VIDEOin REFin
VIDEOin ......................Analog input signal specified by “001 video input“ can’t be detected
during Analog DV mode. If “104 DVout auto-mute” is set to off, error
will not occur even when no analog input signal can’t be detected.
* When “601 SG output” is set to ON, this message will not be displayed.
REFin ..........................Sync signal from the REF input connector can’t be locked, while
“401 ext. sync” is set to “enable” or “advanced” during Analog DV
mode.
* When “601 SG output” is set to ON, this message will not be displayed.