Grass Valley ADVC-700 - Manual (Page 26)

Chapter 2 - Basic Operations
26
2-3. Recording PC-edited data onto a tape with VCR
Output the DV data from a PC and record it with a VCR.
Display
Digital
Monitor
Speaker
Analog
Analog
Analog
VCR
ADVC700
When outputting via
the DV editing software
PC
(IEEE 1394 connector)
Press the [Mode] switch on the front panel of the ADVC700 to switch the mode to the
[DV ANALOG]. 1
Press Light
Use the DV editing software to output your data.
* For the operational procedure of the DV editing software, refer to the instruction manual provided with
your DV editing software.
2
Use the VCR to record the data on tape.
3