Grass Valley ADVC-700 - Manual (Page 16)

Chapter 2 - Basic Operations
16
1-2. ADVC700 rear panel
The rear panel of the ADVC700 has the following connectors.
DV2 DV1
LOCKED
ANALOG AUDIO IN
(Balanced input)
Input connectors for balanced
audio signal. The left connector
on the rear panel is CH1, and the
right one is CH2.
ANALOG AUDIO OUT
(Balanced output)
Output connectors for balanced
audio signal. The left connector
on the rear panel is CH1, and the
right one is CH2.
ANALOG AUDIO OUT
(Unbalanced output)
Output connectors for unbalanced
audio signal. The connector on
the upper row is CH1, and one on
the lower row is CH2.
ANALOG AUDIO IN
(Unbalanced input)
Input connectors for unbalanced
audio signal. The connector on
the upper row is CH1, and one
on the lower row is CH2.
COMPONENT VIDEO
Input and output connectors for
component video signal. The
three connectors on the upper
row are video input, and the
three connectors on the lower
row are video output.