Grass Valley ADVC-700 - Manual (Page 42)

Chapter 2 - Basic Operations
42
401 ext. sync
External synchronization
LCD display
401 ext. sync
disable Disables the external sync operation.
(Factory default)
401 ext. sync
enable
Enables the external sync operation.
401 ext. sync
advanced
Enables the external sync operation as "perfect sync mode".
* This function is only available in DV ANALOG mode (DV decoding). The “advanced” setting is only available
when DV signal is input via an IEEE1394 connector compliant with PC’s OHCI Specification. For supported
operating system for PC, please refer to our web site.
Enables/Disables the external sync operation in
ANALOG DV mode (DV Encoding).
402 ext. sync conf.
External synchronization
configuration
LCD display
402 ext. sync conf.
0 Set specified numerical value between -1024 and 1023.
(Factory default: 0)
Sets the amount (in unit of 37 nanoseconds) to
increase/decrease the ADVC700 video output
delay (system phase) relative to the external sync
input.