Grass Valley ADVC-300 - Manual (Page 34)

34
How to use Picture Controller 300 How to use Picture Controller 300 How to use Picture Controller 300 How to use Picture Controller 300 How to use Picture Controller 300
NOTE
Do not turn ON/OFF the ADVC-
300 power when the computer
connected to the ADVC-300 via a
DV cable is OFF or in a standby
mode.
Picture Controller 300 lets you
adjust the image and sound qual-
ity of streams coming from the
computer via the DV terminal.
These settings are effective even
after the ADVC-300 is turned OFF
or disconnected from the com-
puter.
Tip
F F F F For Windows or Windows or Windows or Windows or Windows
NOTE
When the ADVC-300 power is
OFF, set the [SW1] DIP switch No.
8 to [ON: PC] (PC mode) before-
hand (Refer to P.19).
Connect the ADVC-300 to the computer, boot up the
computer, and set the [POWER] switch to [ON].
1 1