Grass Valley ADVC-300 - Manual (Page 22)

22
Set the ADVC-300 [POWER] switch to [OFF].
Set the [POWER] switch to [ON].
> The [ADJUST LEVEL] LEDs will light in series in the di-
rection from [-5] to [PAGE1/2] twice. After that, LED [-5]
will blink.
> [3D Processing] LEDs, [Y/C] and [NR] turn off.
> The ADVC-300 will enter the image and sound quality
adjustment mode and be put to the standby state.
1 1
3
Set the [SW2] DIP switch No. 1 to [ON].
> The Video Audio Adjust Mode will be set to [Adjust].
2 2
3
Adjusting image and sound quality Adjusting image and sound quality Adjusting image and sound quality Adjusting image and sound quality Adjusting image and sound quality
ADVC-300 is equipped with the image and sound quality adjustment
feature. You can save one setting for external (LINE) inputs.
• The image and sound quality
adjustments for external inputs
is commonly applied to both of
S-video and composite inputs.
• You cannot adjust DV input de-
vices using this feature.
• The settings specified in the
image quality adjustment are ap-
plied when analog data is con-
verted to DV data.
Tip