Grass Valley ADVC-300 - Manual (Page 24)

24
Press the [ENTER] switch to select the currently cho-
sen item
> The [ADJUST LEVEL] LEDs will light in series from [-5] to
[PAGE1/2] twice, and then the current setting value (pre-
viously saved value) will be indicated.
> PAGE1[-5]: When the image and sound default set-
ting has been selected:
All the LEDs of [ADJUST LEVEL] and [3D
Processing] will blink at the same time. Pro-
ceed to step 7.
> PAGE1[+4]: When the image default setting has been
selected:
All the LEDs of [ADJUST LEVEL] will blink
at the same time. Proceed to step 7.
> PAGE1[+5]: When the sound default setting has been
selected:
The two LEDs of [3D Processing] will blink
at the same time. Proceed to step 7.
5 5