Grass Valley ADVC-300 - Manual (Page 16)

16
T T T T Top op op op op
(3) (4) (5) (1) (2)
(1) [ADJUST DOWN] switch
When selecting an item to set up, pressing this switch moves the
ADJUST LEVEL LED's current indication to the left by one. When
adjusting the quality of image or sound, pressing this switch de-
creases the setting value by one.
(2) [ADJUST UP] switch
When selecting an item to set up, pressing this switch moves the
ADJUST LEVEL LED's current indication to the right by one. When
adjusting the quality of image and sound, pressing this switch
increases the setting value by one.
(3) ADJUST LEVEL LED
Shows the value for the image quality setting or sound quality
setting, etc.
(4) 3D Processing LED
Y/C LED
Lights when 3D Y/C separation is activated for processing ana-
log composite inputs.
* Since S-video inputs come with the luminance (Y) and chrominance
(C) signals separated each other from the start, Y/C separation is not
applied to them and thus this LED does not light.
NR LED
Lights when 3D noise reduction is activated.