Read-only information about the module is given on the top of each web
page including model name and description, frame and slot location and
last E-MEM register recalled.

When a channel is selected to configure, the input name (as defined on the
I/O Config web page) will be displayed under the selected channel or will
show the default name in bold type. Each channel will show the signal ref-
erence type (NTSC or PAL).

After making a change, click on

Apply

to activate settings in each selection

then click on the

Refresh

button at the top of the display to see the changes.

Each of the four decoder channels can be adjusted separately or settings can
be applied to other or all channels. Use the

Apply Setting To

(

Channel 1, 2, 3

as applicable)

All

buttons to apply the same values to the other channels

selected or all channels.

To reset the current channel or all channels to factory defaults, select the
Reset defaults for

Current Channel

All Channels

buttons.

Select the

Back

Functional View

, or

Next

link to navigate to the next function or

use the links on the left of the web page.