Grass Valley 8964DEC v.1.1.0 - Manual (Page 17)

8964DEC/-FS — Instruction Manual 17
Installation
Inputs
Four analog composite video inputs are provided at BNCs J1, J3, J5, and J7.
The inputs are non-looping and internally terminated.
Note If feeding a monochrome signal to a channel, select Monochrome In with the
Composite In controls. Refer to
Table 8 on page 67 control summary.
Outputs
Four corresponding serial digital video outputs are provided at BNCs J2, J4,
J6, and J8 as shown in
Figure 5 and Figure 6 . There is no audio tracking
output on the output of the module.
Reference Loop-through Input
Connect an NTSC/PAL analog color black reference source to one of the
loop-through reference connectors, J9 or J10. Terminate the unused con-
nector into 75 ¾ if the signal is not looped to other equipment.
Note The line rate for the module (all four decoder channels) will be auto-detected
from the Reference In signal.