Configuration, Configuration summary, Video processing controls – Grass Valley 8964DEC v.1.1.0 User Manual
Page 20

20
8964DEC/-FS — Instruction Manual
Configuration
Configuration
The 8964DEC can be configured locally using onboard switches or
remotely using the 8900NET network interface GUI or a networked control
panel.
Refer to the following sections for configuration instructions:
•
Configuration Summary (
)
•
Local Onboard Module Configuration (
•
Remote Control and Monitoring (
Operation of these control types is explained in detail in their respective
sections of this manual.
provides a summary in table
format of all parameters and their ranges, default values, and remote, local,
and control panel function names and locations for setting each value.
Configuration Summary
This section provides a summary of all parameters that can be configured
on the 8964DEC module. The video processing configuration is described
by what line types will be affected by the adjustments or choices made. Use
this section in conjunction with the specific configuration method instruc-
tions for each configuration type.
Video Processing Controls
The 8964DEC provides video processing controls for the decoding process
for all four channels independently. How the video data is processed
depends on what line the video is on. Some processing affects all lines,
other processing affects just the active picture lines, programmable VBI
lines or the fixed VBI lines.
Line Categories
The line categories used in the configuration of the video signal for the
8964DEC are defined as follows:
•
F_Active Lines – the portion of the active video that is fixed and always
treated by the module as carrying active video (not programmable).
•
P_Active Lines – lines in the active video that can be configured by the
user to carry either active video or be reserved for carrying user data.
•
CVBI – the lines in the vertical interval that can be configured by the
user.
•
FVBI – the line in the vertical blanking interval that are fixed and are not
configurable.