Grass Valley 8949MDA-CXF - Manual (Page 50)

50 8949MDA-CXF/-SXF — Instruction Manual
Specifications
Specifications
Table 5. 8949MDA-CXF and 8949MDA-SXF Specifications
Parameter Value
Coax Input
Number and type of inputs 1 BNC
Input impedance 75 Ohm
Input signal type Serial digital component conforming to the following formats:
• SMPTE 292M for 1080i/50, 1080i/59.94, 720p/50 and 720p/59.94
• SMPTE 259M (270 Mb/s)
Signal level SDI 800 mV p-p ±10% max
Return loss >15 dB 0.004 to 1.50 GHz
Equalization Auto equalizing:
HD signals up to 125m of Belden 1694A
SD signals up to 330m of Belden 1694A
Tolerated input jitter Compliant with the SMPTE 259M (270 Mb/s) and SMPTE 292M standards
Distributed Coax Outputs (both models)
Number and type of outputs 4 BNCs
Output impedance 75 Ohm
Signal type Serial digital component conforming to the following formats:
• 1080i/50, 1080i/59.94, 720p/50 and 720p/59.94
• SMPTE 259M (270 Mb/s)
Signal level SDI 800 mV p-p ±10%
Return loss >15 dB 4 to 270 MHz
>13 dB 0.27 to 1.50 GHz
Output jitter For input with < 0.1 UI jitter, the output jitter complies with the SMPTE
292M and SMPTE 259M standards
Downscaled Serial Outputs (8949MDA-SXF Module)
Number and type of outputs 4 BNCs
Impedance 75 ohm
Signal type Conforming to SMPTE 259M for 480i/59.94 and 576i/50
SDI level 800 mV±10%
Return loss > 15 dB
Output jitter Conforming to SMPTE 259M for 480i/59.94 and 576i/50
Downscaler delay < 0.95 ms
Downscaler output 10 bits representation
Output transcoding New EDH CRC packet generated on output
Downscaled Composite Outputs (8949MDA-CXF Module)
Number and type of outputs 4 BNCs
Impedance 75 ohm
Signal type Conforming to the SMPTE 170M standard for NTSC and
CCIR624 for PAL-B
Return loss > 40 dB, 0 to 10 MHz
Downscaler delay < 0.97 ms
Downscaler output 8 bits representation