Grass Valley 8949MDA-CXF - Manual (Page 16)

16 8949MDA-CXF/-SXF — Instruction Manual
Installation
Fiber Optics Submodule Overview
Before installing the front module, if using an optional SFP submodule,
install it on the front module first. For a list of the SFP fiber optic submod-
ules options available, refer to
Table 2 . If not using a submodule, proceed
to Front Module Installation on page 20 .
The 8949MDA front modules can be populated with any one of the SFP
(Strap Mount Video Small Form-factor Pluggable) dual transmitter, trans-
ceiver, or dual receiver submodules listed in
Table 2 .
If you have ordered an SFP fiber optic submodule it will come in a separate
kit with an SFP fiber optic submodule, a mounting bracket, and a 2-channel
fiber jumper cable assembly (shown in
Figure 5 ). The fiber optic connector
ends (ferrules) are protected by covers that must be removed before
cabling.
Figure 5. SFP Fiber Optic Kit
Table 2. SFP Fiber Optic Submodule Option Models
SFP Model Number Transmitter Frequencies Supported
SFP-CWDM3G-1-K 1470 nm 1490 nm
SFP-CWDM3G-2-K 1510 nm 1530 nm
SFP-CWDM3G-3-K 1550 nm 1570 nm
SFP-CWDM3G-4-K 1590 nm 1610 nm
Receiver Frequencies Supported
SFP-13103G-M1DRX-K 1270 nm >1610 nm
Transceiver Frequencies Supported
SFP-13103G-M1TRX-K 1310 nm (input) and 1310 nm (output)
Ferrule covers
Duplex end ferrules
Simplex end ferrules
Mounting Bracket
Submodule dust cover
Submodule Label
SCA-2 Connector