Grass Valley 8949MDA-CFR v.1.0.X - Manual (Page 30)

30 8949MDA-CFR and 8949MDA-SFR Instruction Manual
Service
Table of Alarms
The table below describes the different type of alarms:
Module Repair
If the module is still not operating correctly, replace it with a known good spare and
return the faulty module to a designated Grass Valley repair depot. Call your Grass
Valley representative for depot location.
Refer to Contacting Grass Valley at the front of this document for the Grass Valley
Customer Service Information number.
Table 7. List of Alarms for 8949MDA module
Alarm
type
Web Page Description LED concerned Comments
Query status
towards
Netcard&SNMP
Fault Firmware failure if the firmware is wrong or after a bad download
STATUS PAGE:
The color of the front module becomes red YES
Fault Optical failure YES
Fault Optical submodule communication
error communication problem with the optical module YES
Fault Software/Firmware version
incompatible YES
Warning Signal not Present on BNC Input PRES COAX IN
(green) STATUS PAGE:
The electrical input arrow is yellow
SETTING PAGE:
The carrier detect option is not present
YES
Warning Wrong Rear Module The rear module is not compatible with the front module
8949MDA-CFR or 8949MDA-SFR YES
Warning Signal not Present on Optic Input 1 PRES OPT IN 1
(orange) STATUS PAGE:
Optic input arrow is yellow YES
Warning Signal not Present on Optic Input 2 PRES OPT IN 2
(orange) STATUS PAGE:
Optic input arrow is yellow YES
Warning Mismatch or unknown format Format detected different of format selected or unknown
format detected NO
Warning Module not locked NO
Warning Incoming bit stream error Video input signal have a bit stream error NO