Grass Valley 8949MDA-CFR v.1.0.X - Manual (Page 28)

28 8949MDA-CFR and 8949MDA-SFR Instruction Manual
Specifications
Output jitter Conforming to the SMPTE 259M standard
Downscaler delay < 0.95 ms
Downscaler output 9 bits representation
Downscaled Composite Outputs in the Case of 8949MDA-CFR Module
Number and type of outputs 4 BNCs
Signal type Conforming to the SMPTE 170M standard for NTSC and CCIR624
for PAL-B
Return loss > 40 dB, 0 to 10 MHz
Output impedance 75 Ohm
Downscaler delay < 0.97 ms
Downscaler output 9 bits representation
Fiber Outputs
Connector type Up to two LC (IEC 611754-20)
Fiber type Single mode, complying with ANSI/TIA/EIA-492CAAA (class 1Va
dispersion -unshifted, 9/125 micron step index (SI) fiber)
Maximum attenuation of 1.0 dB per kilometer at 1310 nm
Wavelength 1274 to 1356 nm
Signal type Serial digital component conforming to the following formats:
• 1080i/50, 1080i/59.94, 720p/50 and 720p/59.94
• SMPTE 259M (270 Mb/s)
Output power - 12 to -7.5 dBm (average at 1310 nm)
Output jitter For input with < 0.1 UI jitter, the output jitter complies with the
SMPTE 292M and SMPTE 259M standards
Power
Maximum Input power (with fiber optic
submodule)
8949MDA-CFR
8949MDA-SFR 8.5 W
7.9 W
Environmental
Frame temperature range
(Refer to GeckoFlex Instruction Manual) 0 to 45 ° C
Operating humidity range 0 to 90% non condensing
Non-operating temperature -10 to 70 ° C
MTBF at 40°C (inside the frame) in hours
with Tellcordia SR-332 Issue 1
8949MDA-CFR
8949MDA-SFR 637 000
660 000
UL and EU compliance if installed in a GeckoFlex frame
Table 6. 8949MDA-CFR and 8949MDA-SFR Specifications
Parameter Value