Grass Valley 8949MDA-CFR v.1.0.X - Manual (Page 10)

10 8949MDA-CFR and 8949MDA-SFR Instruction Manual
Installation
Installation
The front and the rear modules (Cabling on page 14 ) are delivered together as a set.
The 8949MDA-CFR and 8949MDA-SFR front modules can be plugged in and
removed from a GeckoFlex frame with power on, without disrupting operation on
adjacent running modules. When power is applied to the module, LED indicators
reflect the initialization process (see Power Up
on page 16 ).
CAUTION
It is advised to take precautions for the installation and the removal
of the optional fiber optic submodule, see Optional Fiber Optic Sub-
module on page 12 .
Local Configuration
Local configuration of the 8949MDA-CFR and 8949MDA-SFR consists of several
switches (S1 and S2 blocks) as shown in
Figure 2 .
If you do not have an 8900NET module, you will need to configure the module
using the local onboard controls before installing the front module.
Figure 2. Switches on 8949MDA Module
Config mode
Switch position
8434-0
2