Snmp trap, Snmp trap reports – Grass Valley 8937 v.1.1.0 User Manual
Page 37
8937/8937D — Instruction Manual
37
Configuration
SNMP Trap Reports
Select the SNMP Trap Reports link to open the 8900NET SNMP Reporting
web page. this link will only be present when SNMP Agent software has
been installed on the 8900NET module. This web page allows configura-
tion of which alarms and warnings that are reported to the SNMP manage-
ment software.
This module has separate Module Specific SNMP traps for reporting the
loss of signal for the 8937D for DA 1 and DA 2. The signal loss reporting for
SNMP traps is not collective as it is for the Status web page signal input
reporting as described in the
The Module Specific Traps are defined in
Refer to 8900NET (Net Card) Network Interface Module Instruction Manual for
more details on the links to the 8900NET module.
Table 6. Module Specific Signal Status Traps
Trap Type
Trap Source
Trap Severity
Trap Message
Generic
Input 1
Informational
In 1 is now Present
Generic
Input 1
Informational
In 1 is not Present
Generic
Input 1
Warning
In 1 is Not Monitored
Generic
Input 2
Informational
In 2 is now Present
Generic
Input 2
Informational
In 2 is not Present
Generic
Input 2
Warning
In 2 is Not Monitored