Grass Valley 8921DAC - Manual (Page 23)

8921DAC Instruction Manual 23
Configuration
Remote Configuration and Monitoring
8921DAC configuration and monitoring can be performed using a web
browser GUI interface when the 8900NET Network Interface module is
present in the audio frame (Gecko 8900TFN-A frame). This section
describes the GUI access to the module configuration functions. For
Newton Control Panel information, refer to
Newton Control Panel Configu-
ration on page 40 .
For remote access, make sure the jumper block on the module is set for both
Local and Remote access (
Figure 6 on page 19 ).
Refer to the 8900NET Network Interface Module Instruction Manual for infor-
mation on the 8900NET Network Interface module and setting up and
operating the Gecko 8900 frame network.
Note For optimal performance and access to the latest features, it is recommended
that the 8900NET module be updated to the latest software release. Check the
Grass Valley web site for the current 8900NET software.
Refer to the Frame Status web page shown in Figure 7 on page 24 . The 8900
audio modules can be addressed by clicking either on a specific module
icon in the frame status display or on a module name or slot number in the
link list on the left.
Note The physical appearance of the menu displays on the web pages shown in
this manual represent the use of a particular platform, browser and version
of 8900NET module software. They are provided for reference only. Displays
will differ depending on the type of platform and browser you are using and
the version of the 8900NET software installed in your system. This manual
reflects the use of version 3.2.2 8900NET software.
Use the Refresh button to update the display (available with 8900NET soft-
ware version 3.0 and later).
For information on status and fault monitoring and reporting shown on the
Status page, refer to
Status Monitoring on page 44 .