Configuration, Configuration summary, Audio channel pairing – Grass Valley 8921DAC User Manual
Page 14: Audio delay, Audio processing
14
8921DAC Instruction Manual
Configuration
Configuration
The 8921DAC can be configured locally using on-board switches or
remotely using the 8900NET network interface GUI or a Newton Control
Panel.
Refer to the following sections for configuration instructions:
•
Configuration Summary (
)
•
Local On-board Module Configuration (
)
•
Remote Control and Monitoring (
•
Newton Control Panel Configuration (
)
Operation of these control types is explained in detail in their respective
sections of this manual.
Configuration Summary
This section provides a summary of all parameters that can be configured
on the 8921DAC module. Use this section in conjunction with the specific
configuration method instructions for each configuration type.
provides a summary in table format of all parameters and their
ranges, default values, and remote, local, and control panel function names
and locations for setting each value.
Audio Channel Pairing
The four AES input channels can be arbitrarily recombined (routed) to any
of the four analog output channels.
Audio Delay
Each analog audio output channel can be delayed individually or locked
together in two groups. Outputs can be delayed up to 5 seconds.
Audio Processing
Audio processing can be performed on the four analog outputs to set the
the gain of each output channel or channel pair and the output processing
mode for each pair.