8921dac module onboard configuration settings – Grass Valley 8921DAC User Manual
Page 20
20
8921DAC Instruction Manual
Configuration
•
BANK 2 (second Function) yellow LED – when off, indicates that the
rotary switch is addressing the first bank of functions. When on, indi-
cates that the rotary switch is addressing the second bank of functions.
•
CONTROL (paddle) switch – actuates or selects the desired setting for
the selected function when the switch is held momentarily in either the
up or down position.
•
CONF (configuring) yellow LED – when on, indicates the module is
programming hardware.
8921DAC Module Onboard Configuration Settings
To make a configuration setting:
1.
Rotate the CONTROL rotary switch to Bank 1 (BANK 2 LED off) or
Bank 2 (BANK 2 LED on) and to the desired function within that bank
according to
.
2.
Move the paddle switch to the up or down position and hold
momentarily to set the desired function (refer to
).
Note
Holding the paddle switch in the up or down position for more than a half
second will automatically accelerate through the value range for parameters
with 256 or more values. The full range can be accessed in about 10 seconds.