Managing fc ping tasks, Accessing the fc ping task list, Managing – H3C Technologies H3C Intelligent Management Center User Manual
Page 79: Fc ping tasks
70
For more information about topology in the IMC Platform, see H3C IMC Base Platform
Administrator Guide.
Managing FC ping tasks
VFM allows you to FC ping a destination to test network connectivity. You can manage (such as add,
delete, and modify) FC ping tasks in VFM.
Accessing the FC ping task list
1.
Click the Service tab.
2.
From the navigation tree, select VAN Fabric Manager > SAN Configuration > Fabric
Management.
The Fabric Management page appears.
3.
In the fabric resources tree on the page, select Fabric Management > Fabric name > VSAN name >
FC Ping.
The FC ping task list appears in the right pane.
FC ping task list buttons
{
Run—Click this button to execute FC ping tasks immediately (see "
").
{
Suspend—Click this button to suspend the FC ping tasks that you do not need to run (see
"
").
{
Resume—Click this button to resume the FC ping tasks that have been suspended (see
"
").
{
Add—Click this button to add an FC ping task (see "
").
{
Delete—Click this button to delete undesired FC ping tasks (see "
").
{
Refresh—Click this button to refresh the page with the latest FC ping task list.
FC ping task list columns
{
Status-Operation Result—Status and operation result of the FC ping task. Options for Status
are All, Waiting for Execution, Executing, Suspending, Suspended, Finished, and Expired.
Options for Operation Result are All, Succeeded, Failed, Partially Succeeded, and Unfinished.
{
Task Name—Name of the FC ping task.
{
Source Device—Name of the source device for the FC ping task. By default, this field displays
the device label and device IP address. The device label is assigned in the IMC Platform. The
device IP address is the IP address used when the device was added to the IMC Platform.
{
Destination Device—Name of the destination device for the FC ping task. By default, this field
displays the device label and device IP address. The device label is assigned in the IMC
Platform. The device IP address is the IP address used when the device was added to the IMC
Platform.
{
Schedule Type—Schedule type of the FC ping task. Options are Once and Cycle.
{
Creation Time—Time when the FC ping task was created.
{
Modify—Click the Modify icon to modify the FC ping task (see "
").
{
Results—Click the Results icon
to view the results of the FC ping task (see "
").