H3C Technologies H3C Intelligent Management Center - Manual (Page 71)

62
You can activate an inactive zone set or reactivate an active zone set to distribute the modified zone set
in the VSAN. After you activate a zone set, VFM distributes the active zone set or the zone database to
all FCoE switches in the VSAN. The zone distribution policy determines the distribution mode.
After the first zone set activation for a VSAN, the fabric resources tree displays the Active Zone Set node
under the VSAN node, as shown in Figure 14 . For more information about active zone set management,
see " Managing the active zone set ."
Figure 14 Active zone set
To modify a zone set:
1. In the zone set list, click the Operation icon and select Modify from the popup menu.
2. Enter a new zone set name. The name must unique in the VSAN.
3. Click OK.
To copy a zone set:
1. In the zone set list, click the Operation icon and select Copy from the popup menu.
2. Enter a new zone set name. The name must be unique in the VSAN.
3. Click OK.
The new zone set and the original zone set have the same configurations. The only difference between
them is their names.
To delete zone sets:
1. From the zone set list, select one or more zone sets.
2. Click Delete.
A confirmation dialog box appears.
3. Click OK.
Deleting the active zone set removes it from the zone set list but not from the VSAN. You can deactivate
the active zone set in global zone configuration.