H3C Technologies H3C Intelligent Management Center - Manual (Page 67)

58
VFM zone configurations synchronized to FCoE switches
When you perform the following operations, VFM automatically synchronize the configurations to all
FCoE switches in a VSAN:
• Add, modify, copy, and delete zone sets.
• Add zones to a zone set and delete zones from a zone set.
• Add, modify, copy, and delete zones.
• Add zone members or zone aliases to a zone and delete zone members or zone aliases from a
zone.
• Add, modify, copy, and delete zone aliases.
• Add zone members to a zone alias and delete zone members from a zone alias.
Active zone set
When you activate a zone set, VFM creates a copy of the zone set at the time of activation. This copy is
known as the active zone set. Modifications to the zone set do not take effect on the copy until the copy
is activated again. When you delete the zone set, the copy is not affected. Figure 13 shows the relations
between the active zone set and full zone sets.