H3C Technologies H3C Intelligent Management Center - Manual (Page 60)

52
Configuration example
Network requirements
The R&D department and the marketing department of an enterprise belong to the subnet 10.1.0.0/16
and 10.2.0.0/16, respectively.
Configure a VSI Type to allow the R&D department and the marketing department to access the file
server of the enterprise and apply the following network policies to the two departments:
• The downlink CIR and PIR of the R&D department are 4 Mbps and 10 Mbps, respectively. The
uplink rate is not limited.
• The downlink CIR and PIR of the Marketing department are 5 Mbps and 10 Mbps, respectively.
The uplink rate is not limited.
• The priorities for packets sent by the file server to the R&D department and the marketing
department are 4 and 5, respectively.
Configuration procedure
1. Create VSI Type A.
a. Click the Resource tab.
b. From the navigation tree, select VAN Connection Manager > VSI Type.
c. Click Add.
The Add VSI Type window appears.
d. Configure basic information and parameters for VSI Type A as shown in Table 6 .