H3C Technologies H3C Intelligent Management Center - Manual (Page 10)

2
Support for VEB
VCM support for VEB requires the cooperation of VRM, a subcomponent of the IMC Platform. VCM
relies on VRM to obtain the VM status and access location information for VSI Type deployment and
undeployment. For information about VRM, see H3C IMC Base Platform Administrator Guide.
Figure 1 VCM in VEB
As shown in Figure 1 :
1. VRM detects VM status changes on the physical server.
2. VCM obtains the VM information from VRM.
3. VCM finds the VSI Type bound to the VM, and then deploys or undeploys the VSI Type to the
edge switch that connects to the physical server of the VM.
The VRM component must be correctly configured before you use VCM in the VEB solution. For
information about how to configure VRM, see "
3 Preparations ."