H3C Technologies H3C Intelligent Management Center - Manual (Page 45)

37
Modular VCM privileges
An operator group can be granted all or part of the privileges to manage functional modules of VCM,
as shown in Figure 21 .
Figure 21 Modular VCM privileges
Network operations are determined by privileges VAN Connection Manager - Connection and VAN
Connection Manager - Network, as shown in Table 5 . For information about configuring privileges for
an operator group, see H3C IMC Base Platform Administrator Guide.
Table 5 Network operations and privileges
Privilege Network operations Remarks
VAN Connection
Manager - Network • Accessing the network management page
• Adding, modifying, and deleting networks
The Network option is appears
only when the operator group
has the ADMIN privilege.
VAN Connection
Manager -
Connection
• Adding, modifying, and deleting connections
for a network
• Deploying vApps on a network
• Viewing connections on a network
N/A
Assigning network management privileges
To assign network management privileges to other operators, use an operator that has both the ADMIN
privilege and the VAN Connection Manager - Network privilege.
Assigning network management privileges to a new operator
1. Access the Add Operator page. (Details not shown.)
2. In the Basic Information area, configure parameters of the operator. (Details not shown.)
When you select an operator group, follow these restrictions and guidelines:
{
When the operator group has the Maintainer or Viewer privilege, it must be granted the VAN
Connection Manager - Connection privilege.