H3C Technologies H3C SecPath F1000-E - Manual (Page 16)

15
Solution:
• On Device A and Device C, execute the display ip routing-table command in any view
respectively. On Device A, observe whether there is a route from Device A through Tunnel 0 to
10.2.0.0/16. On Device C, observe whether there is a route from Device C through Tunnel 0 to
10.1.0.0/16.
• If an expected static route is missing, use the ip route-static command in system view to configure.
For example, configure a static route on Device A as follows:
[DeviceA] ip route-static 10.2.0.0 255.255.0.0 tunnel 0