beautypg.com

Setting terminal parameters – H3C Technologies H3C WA3600 Series Access Points User Manual

Page 23

background image

18

Figure 17 Connect the console cable

3.

Power on the AP.
The AP’s startup information will be displayed.

Setting terminal parameters

To set terminal parameters, for example, on a Windows XP HyperTerminal:

1.

Select Start > All Programs > Accessories > Communications > HyperTerminal.
The Connection Description dialog box appears.

2.

Enter the name of the new connection in the Name field and click OK.

Figure 18 Connection description

3.

Select the serial port to be used from the Connect using list, and click OK.

This manual is related to the following products:
See also other documents in the category H3C Technologies Routers: