H3C Technologies H3C WA3600 Series Access Points - Manual (Page 18)

13
Figure 13 Drill a hole in the ceiling and route the cable
(1) Ethernet cable (2) Ceiling (3) T-rail
NOTE:
To ensure neat cabling, follow Figure 13 to drill a hole in the ceiling and route the cable.
Securing the AP
NOTE:
The security lock is user supplied.
You can secure the AP by installing a security lock into the security slot on the AP.
To install the security lock:
1. Loop the security cable around a nearby immovable object.
2. Insert the key into the security lock.
3. Insert the security lock latch into the security slot on the access point.
4. Rotate the key right or left to secure the security lock to the access point.
5. Remove the key from the security lock.
1
2
3