H3C Technologies H3C WA3600 Series Access Points - Manual (Page 19)

14
Figure 14 Secure the AP
(1) Security slot (2) Security lock (3) Security cable
Connecting the power supply
The WA3600 series can be powered by the local power or through 802.3af-compliant PoE. You can
select one as needed.
Check before power-on
Check the following items before you power on the AP:
• The power supply is well grounded when the AP adopts local power supply.
• The PoE power supply is well grounded when the AP adopts PoE power supply.
PoE power supply
If the uplink device of the AP is a PoE switch, use an Ethernet cable to directly connect the Ethernet
interface of the AP to the PoE device.
1
2
3