Table 23 – H3C Technologies H3C S5120 Series Switches User Manual
Page 59

51
Transceiver module
Central
wavelength Connector Fiber
Max transmission
distance
SFP-GE-LH40-SM1550
1550 nm
LC
9/125 μm single mode
optical fiber
40 km (24.86 miles)
SFP-GE-LH70-SM1550
70 km (43.50 miles)
SFP-GE-LH100-SM1550
100 km (62.14
miles)
SFP-GE-LX-SM1
310-BIDI
These two
transceiv
er models
must be
used in
pairs.
TX: 1310 nm
RX: 1490 nm
LC
9/125 μm single mode
optical fiber
10 km (6.21 miles)
SFP-GE-LX-SM1
490-BIDI
TX: 1490 nm
RX: 1310 nm
SFP-GE-T
N/A
RJ-45
Twisted pair cable
100 m (328.08 ft)
Table 23 10GE SFP+ transceiver modules and SFP+ cables
Transceiver
module/Cab
le type
Transceiver
module/Cab
le
Central
wavelength Connector Fiber
Max
transmission
distance
10 GE SFP+
transceiver
module
SFP-XG-SX-M
M850-A
850 nm
LC
50/125 μm multimode
optical fiber
300 m (984.25
ft)
SFP-XG-LX220
-MM1310
1310 nm
62.5/125 μm
multimode optical fiber
220 m (721.78
ft)
SFP-XG-LX-SM
1310
9/125 μm single mode
optical fiber
10 km (6.21
miles)
SFP-XG-LH40-
SM1550
1550 nm
9/125 μm single mode
optical fiber
40 km (24.86
miles)
Short-haul 10
GE SFP+
cable
LSWM1STK
N/A N/A SFP+
cable
0.65 m (2.13
ft)
LSWM2STK
1.2 m (3.94 ft)
LSWM3STK
3 m (9.84 ft)
LSTM1STK
5 m (16.40 ft)
LSWM4STK
10 m (32.81 ft)
NOTE:
•
To guarantee the functionality of the SFP/SFP+/XFP ports, always use H3C transceiver modules on the
S5120-EI Switch Series.
•
The transceiver modules available for this switch are subject to change over time. For the most up-to-date
list of transceiver modules, consult your H3C sales representative or technical support engineer.
•
For the transceiver module specifications, see
H3C Low End Series Ethernet Switches Pluggable Modules
Manual. For how to install a transceiver module, see H3C Pluggable SFP/SFP+/XFP Transceiver
Modules Installation Guide.