Installing the switch into a 19-inch rack, Installation methods, Mounting bracket – H3C Technologies H3C S5120 Series Switches User Manual
Page 13

5
NOTE:
The S5120-28C-EI, S5120-52C-EI, S5120-28C-PWR-EI, and S5120-52C-PWR-EI support IRF. For more
information, see "
."
Installing the switch into a 19-inch rack
Installation methods
You can install a switch into a 19-inch standard rack in one of the following ways:
•
Use front mounting brackets
•
Use front mounting brackets and a rack-shelf
•
Use front mounting brackets and rear mounting brackets
The installation methods of a switch depend on the depth of the switch. For the specific installation
methods, see
.
Table 3 Installation methods
Method
Use front mounting
brackets
Use front mounting
brackets and a rack-shelf
Use front and rear
mounting brackets
Depth
300 mm (11.81 in)
√
√ N/A
420 mm (16.54 in)
N/A
√
√
NOTE:
For a switch with a depth greater than 300 mm (11.81 in), the front mounting brackets only secure the
switch rather than bear its weight.
Mounting bracket
Figure 2 Appearance of a standard front mounting bracket
(1) Screw hole for attaching the mounting bracket to the cabinet (Use one M6 screw)
(2) Screw hole for attaching the switch to the mounting bracket