H3C Technologies H3C S5130 Series Switches - Manual (Page 44)

37
S5130-28F-EI
Figure 51 Front panel
(1) 100/1000Base-X SFP port (2) 100/1000Base-X SFP port LED
(3) 10/100/1000Base-T autosensing Ethernet port (4) 10/100/1000Base-T autosensing Ethernet port LED
(5) SFP+ port
(6) SFP+ port LED
(7) Console port (8) System status LED (SYS)
(9) Power module 1 status LED (PWR1) (10) Power module 2 status LED (PWR2)
Figure 52 Rear panel
(1) Grounding screw (2) Power module slot 1
(3) Power module slot 2
The S5130-28F-EI switch comes with no power module or filler panel in power module slot 1 and a filler
panel in power module slot 2. You can install one or two power modules for the switch as needed.
In Figure 52 , two PSR150-A AC power modules are installed. For more information about installing and
removing a power module, see " Installing and removing a power module (S5130-28F-EI switch) ."
Technical specifications
Table 8 Technical specifications for non-PoE switch models
Item S5130-28S-EI S5130-28TP-EI S5130-52S-EI S5130-28F-EI S5130-52TP-EI
Dimensions (H
× W × D)
43.6 × 440 ×
160 mm (1.72
× 17.32 ×
6.30 in)
43.6 × 440 ×
160 mm (1.72 ×
17.32 × 6.30 in)
43.6 × 440 ×
260 mm (1.72
× 17.32 ×
10.24 in)
43.6 × 440 ×
360 mm (1.72
× 17.32 ×
14.17 in)
43.6 × 440 ×
270 mm (1.72 ×
17.32 × 10.63
in)
Weight
≤ 5 kg (11.02
lb)
≤ 3 kg (6.61 lb)
≤ 5 kg (11.02
lb) ≤ 8 kg (17.64
lb) ≤ 5 kg (11.02
lb)
Console ports 1 1 1 1 1
1 2 3 4 5 6 7 8
9
10