H3C Technologies H3C S5130 Series Switches - Manual (Page 13)

6
The S5130-28TP-PWR-EI, S5130-52S-PWR-EI, S5130-28F-EI, and S5130-52TP-PWR-EI switches provide
three mounting positions: one front mounting position (near the network ports), one mid-mounting
position, and one rear mounting position (near the power modules).
To attach the mounting brackets to the switch:
1. Determine the mounting position.
2. Align one mounting bracket with the screw holes at the mounting position. Use M4 screws
provided with the switch to attach the mounting bracket to the chassis.
3. Repeat step 2 to attach the other mounting bracket to the chassis.
Figure 4 Attaching a two-hole mounting bracket to the front mounting position on an S5130-28S-EI
switch
Figure 5 Attaching a two-hole mounting bracket to the rear mounting position on an S5130-28S-EI
switch
Figure 6 Attaching a four-hole mounting bracket to the front mounting position on an S5130-28F-EI
switch